In this box you'll find all the tools needed to assemble the Leo Rover Developer Kit.
A plastic tray to store screws during the assembly steps.
A 3D-printed microSD card extraction tool that becomes handy when you need to disconnect the microSD card from the inernal RaspberryPi port.
The tool files for 3D-printing are available as here as well.
A set of screwdrivers (2mm, 3mm, 4mm, T40 torx)
A 12.6V DC battery charger with EU wall plug (+ EU-US plug adapter)
A bottle of Loctite 243 to secure threaded connections, a bottle of vaseline for easier cable threading, a tube of lithium grease for the wheels assembly
A set of flat wrenches (7mm, 8mm, 10mm) and a cross-headed Philips screwdriver
3 sets of nuts and bolts to mount additional equipment on the top platform of the Rover
A mini-USB to USB-A adapter to access the top mini-USB socket with standard USB-A devices
.JPG)
